.Patented SPI+TM interface for simplicity of local dimming control
|
.Patented logical feedback for automatic supply regulation
|
.LED brightness local dimming and scanning mode control are supported
|
.High linearity gray response with accurate 1 to 100% PWM dimming control
|
.Real-time dot correction of luminance
|
.Backlight local dimming controller available
|
.Built-in internal PWM clock, 4 independent 8-bit PWM digital current controlled outputs
|
.Vsync frame start and external PWM clock input for Hsync synchronization are available
|
.Open detection to bypass unconnected or broken LED strings
|
.4 constant current sinkers with output voltage sustainable to 24V
|
.Excellent regulation to load, supply voltage and temperature
Temperature regulation: ± 0.005%/°C,
Load regulation: ± 0.1%/V
Line regulation: ± 0.5%/V
|
.High current matching accuracy: ± 1% between outputs, ± 2% between ICs
|
.Constant output current : 60 – 180/240mA@3.3/5V
|
.Low dropout voltage 0.5V@120mA,VDD=5V
|
.Output current is set by a single external resistor and OEI programmable outputs
|
.Buffered outputs to regenerate input signals for cascaded operation
|
.CMOS Schmitt trigger inputs
|
.Built-in power on reset(POR) circuit forces all the outputs ON while power on
|
.Built-in thermal protection function to prevent damage from over current operation
|
.:
|
.Applications: Local dimming LED backlighting
|
|
|