.ModelessTM On-the-fly error detection:
Directly Data-In Error-Out, without mode shifting and command configuration
|
.Seamless backward compatible with SCT2167, SCT2168, SCT2110:
Pin-to-pin package replacement without any PCB change
Timing control the same as standard Serial-In Parallel-Out interface
|
.Concurrent open/short detection without selection
|
.Shorter 200ns error detection time
|
.8 robust constant current sinker
|
.Constant output current : 20-90/120mA@3.3/5V
|
.Wide power supply voltages: 3.3V to 5V
|
.Excellent regulation to load, supply voltage and temperature
Temperature regulation: ± 0.005%/°C,
Load regulation: ± 0.1%/V
Line regulation: ± 0.5%/V
|
.High current matching accuracy: ± 1% between outputs, ± 2% between ICs
|
.Fine grayscale response with 120ns PWM pulse width
|
.Dropout voltage 0.6V@120mA,VDD=5V
|
.CMOS Schmitt trigger inputs with clock rate up to 25MHz @ cascade connection
|
.The constant current value of 8 outputs is set by a single external resistor
|
.Gradually 2.5ns delay of output, preventing instant current surge and output bouncing
overstress
|
.Built-in power on reset(POR) circuit forces all the outputs off while power on
|
.Built-in thermal protection function to prevent damage from over current operation
|
.:
|
.Applications: LED Traffic Signs, LED Displays, Variable Message Signs, Illumination
|
|
|